Built in 1965, by the Pacific Coast Engineering Company (PACECO) of Alameda, California (hull #207) as the Daring for Crowley Marine Services Incorporated of San Francisco, California.
She was the first Daring class tug constructed by the Pacific Coast Engineering Company for Crowley Marine Services Incorporated.
Designed by Naval Architect Phil Spaulding, the Daring class was the first class of tugs constructed for Crowley Marine Services. The design featured a simplified engine room. As well as gauges, alarms, and controls for the engine room in the wheelhouse.
This allowed the company to reduce the manning of the tug from twelve men, to eight, in an effort to give Crowley Marine an advantage over their competition.
In 1997, she was acquired by Robbins Maritime Incorporated of Norfolk, Virginia. Where the tug was renamed as the Bay Storm.
In 2002, the tug was acquired by the Brusco Tug and Barge Company of Longview, Washington. Where she was renamed as the Edward Brusco.
In 2019, the tug was phased out of active service and was "laid up" at Cathlamet, Washington.
Powered by a single, EMD 16-645 E5 diesel engine. With a Falk reduction gear, at a ratio of 4.536.1. Turning a single, fixed pitch, five bladed, 122(in) by 98(in) propeller. For a rated 2,200 horsepower.
Her electrical service is provided by two Caterpillar 3306 110 kW/AC generator sets. The tug's capacities are 60,000 gallons of fuel oil, 40,000 gallons of ballast, 18,000 of fresh water, and 2,200 gallons of lube oil.
The towing gear consists of an Almond Johnson 222, towing winch. Outfitted with 2,000(ft) of 2(in) towing wire.